AMSOIL synthetic 2-stroke Injector Oil
Product Code: AIO
For oil-injected and 50:1 pre-mix
For two-stroke outboard motors and snowmobiles
Use where API TC and NMMA TC-W3 oils are specified
Reduces wear and maximizes engine life
High lubricity and reliable film strength help protect against piston scuffing and bearing wear
For Evinrude factory-lean setting, use AMSOIL HP Marine (HPM) Synthetic 2-Stroke Oil.
AMSOIL INTERCEPTOR Synthetic 2-Stroke Oil
Product Code: AIT
For oil-injected and 50:1 pre-mix
For snowmobiles, motorcycles, PWC, ATVs and jet boats
Use where API TC oils are specified
High-performance two-stroke oil with an emphasis on exhaust power valves
Has high levels of detergent additives to prevent valve sticking
Use in direct-fuel-injected (DFI), electronic-fuel-injected (EFI) and carbureted two-stroke snowmobiles including Polaris*, BRP*/Ski-Doo* (Rotax* E-TEC* engines), Arctic Cat* (C-TEC 2) and Yamaha*.
AMSOIL DOMINATOR® synthetic 2 stroke racing oil
Product Code: TDR
For oil-injected and 50:1 pre-mix where API TC oil is specified
Blend of oils / additives that address the heat, pressure and friction of 2-stroke race engines
Protects high-performance engines
Outstanding protection at 50:1
Many racers tailor the mix ratio to their engines
Not suitable for use with alcohol or nitro-methane fuels.
AMSOIL HP Marine Synthetic 2 stroke oil
Product Code: HPM
For oil-injected and 50:1 pre-mix
Use where NMMA TC-W3 or API TC oils are specified
Excellent for Evinrude® E-TEC™ factory-lean setting
Replaces Evinrude XD100™ 2-Cycle Oil
Helps prevent deposits, protects against wear
Low smoke, protects against rust, low aquatic toxicity.
.png "Outboard 2-stroke oil")
AMSOIL Outboard Synthetic 2 stroke oil
Product Code: ATO
For Pre-mix at 32:1, 40:1, 50:1, 80:1, 100:1 or richer
Pre-mix use where TC-W3 is specified
Pre-mix use in water-cooled 2 stroke outboard motors, personal watercraft and jet boats
Better throttle response - lower / no smoke
Cooler operations of water-cooled motors.
AMSOIL Saber Professional® Synthetic 2 stroke oil
Product Code: ATP (used in the Echo & Lucas studies)
For Pre-mix at 32:1, 40:1, 50:1, 80:1, 100:1 or richer
Use where JASO FD, ISO-L-EGD, API TC is specified
For best results and maximum benefit use at the Saber recommended mix-ratio of 80:1 or 100:1
Minimizes deposit formation and lowers emissions
For hand-held power equipment, chainsaws, lawn/utility equipment.
AMSOIL Synthetic Chaincase & Gear Oil
Product Code: TCC
For enclosed chains and gears in snowmobiles, ATVs, general equipment
Repels water, inhibits rust, oxidation and foam
Low pour point for superior low-temperature starting
Meets the demands of enclosed chaincases / gearcases
Formulated with extreme-pressure additives
Increased wear protection extends chain & gear life
*All trademarked names are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use.
